FreeBSD/ntpd の変更点
*ntpdによる時刻同期 [#v6c4df4a]
#contents
**ntpdの特徴 [#c59df949]
ntpdはシステムに問題が起きないように、少しずつ時刻を合わせて行きます。
初めに起動する前に
ntpdateコマンドで時刻を合わせておく事をお勧めします。
**/etc/ntp.confの編集 [#l23ed468]
restrict default ignore
restrict 127.0.0.1
restrict 192.168.1.0 mask 255.255.255.0 nomodify nopeer notrap
restrict 202.224.32.4 nomodify notrap noquery # ntp.asahi-net.or.jp
restrict 210.173.160.27 nomodify notrap noquery # ntp1.jst.mfeed.ad.jp
restrict 210.173.160.57 nomodify notrap noquery # ntp2.jst.mfeed.ad.jp
restrict 210.173.160.87 nomodify notrap noquery # ntp3.jst.mfeed.ad.jp
server -4 ntp.asahi-net.or.jp minpoll 6 maxpoll 10 prefer
server -4 ntp1.jst.mfeed.ad.jp minpoll 8 maxpoll 15
server -4 ntp2.jst.mfeed.ad.jp minpoll 8 maxpoll 15
server -4 ntp3.jst.mfeed.ad.jp minpoll 8 maxpoll 15
logconfig -syncstatus
logfile /var/log/ntpd.log
pidfile /var/run/ntpd.pid
driftfile /var/db/ntpd.drift
***小さいntp.conf [#h72dda9d]
■その1
server ntp1.tohoku.ac.jp
driftfile /etc/ntp.drift
■その2
server ntp1.jst.mfeed.ad.jp
server ntp2.jst.mfeed.ad.jp
server ntp3.jst.mfeed.ad.jp
driftfile /etc/ntp.drift
**/etc/rc.confの編集 [#x223806f]
# NTPD
ntpd_enable="YES"
ntpd_sync_on_start="YES"
**起動 [#tb05c872]
# /etc/rc.d/ntpd start
**確認 [#ycd3e5f2]
# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
orion.asahi-net 202.224.53.11 2 u 6 64 1 9.213 -1.612 0.002
ntp1.jst.mfeed. 210.173.160.56 2 u 5 256 1 8.065 0.099 0.002
ntp2.jst.mfeed. 133.243.236.19 2 u 4 256 1 9.527 0.550 0.002
ntp3.jst.mfeed. 210.173.160.56 2 u 3 256 1 8.920 0.343 0.002